The plastic melting machine is also called a plastic pellet machine. Due to the recyclable nature of plastic products, plastics can be made into plastic particles after melting and then subjected to secondary processing to make new plastic products.
Structural composition of plastic melting machine
This machine is mainly composed of two parts: the main machine and auxiliary machine. After being crushed, washed, and dried (plastic film materials do not need to be cleaned), they are sent to the host, and the heating part of the host continuously heats the material to melt into a paste-like material. Then it is discharged through the discharge port and enters the auxiliary machine, and is extruded at the die of the auxiliary machine to form a long plastic strip.
Characteristics of plastic pellet machine
1. This machine has various heating methods: the heating methods of plastic pellet extruder include cast aluminum heating ring, quartz tube heating ring, ceramic heating ring, electromagnetic heating ring and so on. The electromagnetic heating coil has the best heating effect, but it is generally unnecessary to use electromagnetic heating when processing plastic film products.
2. The material of screw and barrel inside the machine are 45 # steel, 40CR, 38CRSI, etc. We design different screws according to different plastic characteristics. And according to customer requirements, we also customize nitriding, chrome plating, and other processes to extend the service life of the machine.
3. The machine has a different output, which can meet the different needs of customers.
Parameters of plastic melting machine
Type | 105 | 125 | 135 | 150 | 180 | 200 | 220 |
Screw diameter | 105mm | 125mm | 135mm | 150mm | 180mm | 200mm | 220mm |
Spindle speed | 50-70/min | 50-70/min | 40-50/min | 40-50/min | 40-50/min | 40-50/min | 40-50/min |
Main motor power | 18.5kw | 30kw | 37kw | 37kw | 55kw | 75kw | 90kw |
reducer（hard gear ） | 200 | 225 | 250 | 250 | 280 | 315 | 330 |
Weight | 1.3T | 1.8T | 2T | 2T | 2.2T | 2.8T | 3.2T |
Size | 2.4*0.7*0.7 | 2.6*0.7*0.7 | 2.8*0.7*0.7 | 3.0*0.7*0.8 | 3.2*0.7*0.8 | 3.5*1*1 | 3.8*1.2*1 |
Output | 150KG/H | 180KG/H | 200KG/H | 300KG/H | 350KG/H | 380KG/H | 420KG/H |
Contact details
Whatsapp/Tel/Wechat: +8617324840543
Email: elva@shuliy.com
FAQ
1. What is the output range of this machine?
Answer: The output range of this machine is 150-500KG.
2. What is a forced feeder?
Answer: The forced feeder is a device used only for processing plastic film materials. Film materials are light in weight and large in volume. If this equipment is not used, the phenomenon of material return may occur.
Company strength
Shuliy Group was successfully registered in Zhengzhou, Henan in 2011. Although it has been established for a short time, it is currently in a leading position in the industry.
Our company's main products are plastic granulators, plastic shredders, plastic cutters, plastic bottle recycling production lines, etc. As a leader in the industry, we have commercial cooperation with more than 90 countries around the world and have gained good cooperative relations.
If you have any questions about plastic recycling equipment, please contact us.
