Banner
Home > Knowledge > Content

How to connect the heating rings of the sawdust briquette machine?

Feb 27, 2019

How to connect the heating rings of the sawdust briquette machine

The users who are familiar with the sawdust briquette machine knows that the heating ring is an important part of the sawdust briquette machine. And after a long time using, the heating rings will be damaged and should be replaced. However, most of the users are dont know how to connect the heating rings. The following steps can help you to connect them correctly.

Step 1: take out three heating rings

There are six labels with numbers on them in picture 1, please pay attention and follow the indication.

图片1

Step 2: take a shorter high-temperature resistant wire

图片2

Step 3: 1 and 3 are connected by a truncated segment of the short line to the middle ( picture 3)

图片3


Step 4: connect 3 to 5 like picture 4

图片4

Step 5: take 3 high-temperature resistant wires of 1.8m 

图片5

Step 6: connect these 3 high-temperature resistant wires of 1.8m to 2, 4 and 6 respectively

图片6

Step 7:  install 6 porcelain caps onto the six nuts

图片7

Step 8: connect 3 long heating wires to the heating part in the control cabinet of the following drawing of sawdust briquette machine.

If you still have something want to know about the heating ring and the sawdust briquette machine, you can leave a message on our website or contact us directly at Tel/ WhatsApp/ Wechat +86 15838192276. 



Back