Technical parameter of single twisting machine
Model | FTMH-20 |
Capacity | 10KG/H |
Voltage | 220V/380v |
Power | 0.75kw |
Frequency | 50hz |
Weight | 100kg |
Dimension | 1200*630*750mm |
Model | FTMH-150 |
Capacity | 50KG/H |
Voltage | 380V |
Power | 5kw |
Frequency | 50hz |
Weight | 400kg |
Dimension | 1200*630*750mm |
Model | FTMH-300S |
Capacity | 150KG/H |
Voltage | 380V |
Power | 6kw |
Frequency | 50hz |
Weight | 500kg |
Dimension | 1500*1300*1800mm |
Advantage of fried dough twisting machine
1. Our fried dough twist machine can produce 2, 3, 4, 6, 8, 9 strands dough twist
2. Automatic feeding, automatic twisting and automatic cutting.
3. The finished dough twist bears crispy taste.
4. The length can be adjusted arbitrarily.
5. High working efficiency. The dough twist making machine can be more than ten times higher than hand-made, and
4. The operation of this machine is simple.
How to maintain fried dough twist machine?
1. You should operate machine in accordance with operating procedures. Do not violate the operating rules, otherwise it may affect the service life of the machine and cause human damage.
2. Check before starting each day, pay attention to observation during operation, and carefully clean up.
3.Small problems should be dealt with in time.
What should be noted during operation?
1. Level the machine during operation, connect the power supply, and refuel the gears and lubricating parts before working. After turning on the machine, first check whether the direction of rotation is correct, and then listen to the machine for abnormal sounds.
2. Brush the cutting knife with cooking oil to avoid sticking the knife. The twist will be cut by the cutter on the conveyor belt according to the required length. The twist will be flattened at the same time as the cut will not spread when fried. After the twist is cut, it can be fed into the oil pan through a conveyor belt.
3. When installing the mold, first invade the mold with edible oil or water, and then install it on the machine.
4.When the twists are smooth, you can discharge more.
6.After shutdown, plug the outlet and the feeding hopper with oil cloth or plastic cloth to avoid clogging。
7. Stop feeding before stopping. When the remaining material is finished, clear the machine head residue for next use.