Banner
Home > Product >> Baler Machine

Metal Baler

Chat Now

Product Details

The metal baler is used to cold-press various metal raw materials such as scrap metal, iron drum, aluminum scrap and steel frame to a minimum volume for transportation, storage, and recycling. No chemical reagents are added during the compression package. It does not change the nature of the raw materials.

The structural composition of the metal baler:

The machine is hydraulic, with four cylinders inside the machine, hydraulic motor, telescopic arm, pressed door panel, and flip board. There are many discharging ways of the machine, which can be divided into front turning out, front pushing out, side turning out, side pushing out, manual discharging, etc. Generally speaking, large-scale machines are configured to push the material out. When the material is heavy, the flap device is easy to be damaged.

metal baler

How does the hydraulic metal baler work?

1. First, turn on the power supply, observe the operation of the machine, and put it into production after normal operation.

2. Put the material into the compression chamber. Pay attention that the size of the material that cannot exceed the compression chamber. If the size of the object is too large, the special machine can be used to cut off the metal. In addition, it is not allowed to make the machine compress too many raw materials at one time. Otherwise, the machine is easy to be damaged under overload.

3. The pressing door plate of the machine is gradually pressed down and locked. The front pushing hydraulic pressing plate and the back pushing hydraulic pressing plate continuously extrude the material, and the density of the metal block can reach 5t / m3.

Advantages of the metal baler

1. All models are hydraulically operated and can be programmed manually or in PCL.

2. With a crushing force ranging from 125 tons to 400 tons, there are eight grades to meet the different needs of customers. The size of the corresponding compressed metal block ranges from 30*30cm to 60*60cm.

3. Easy to install, no need to install the sole screws. In addition to the electric mode, a diesel engine can also be used as a power source.

4. The production range can reach 0.5T-20T / h.

5. The size of the compression chamber and compression block can be modified according to the customer's requirements.

Horizontal metal baler

Parameters

Type

Size of the compression chamber(mm)

Size of the press block

(cm)

Time-consuming

(s)

Power (kw)

Y81-125

1200*800*500

30*30

100

15

Y81-135

1200*1000*600

30*30

110

18.5

Y81-160

1200*1000*600

35*35

110

18.5

Y81-180

1600*1200*800

40*40

130

22

Y81-200

1600*1200*800

50*50

140

22+15

Y81-250

2000*1750*1000

50*50

150

44

Y81-315

2500*2000*1200

60*60

160

60

Y81-400

3000*2500*1200

60*60

170

90

FAQ

1. What is the after-sales service?

A: Provide on-site installation service, and provide a free warranty for the machine within one year after purchase.

2. What the price of this machine?

A: Friend, we have many different types of machines, and this price is all different. You'd better provide a specific machine model, or provide your output, size, etc., our customers will make relevant recommendations for you.

3. Do you have a special machine for cutting metal?

A: of course. If you need this machine, please contact me for details.

Contact details

Whatsapp/Tel/Wechat:+86 17303821432

Email: info@bestshuliy.com

Our company

Shuli Machinery Equipment Co., Ltd. is a company specializing in the foreign trade industry. It has more than ten years of experience in metal recycling equipment. At present, our main products are mainly metal balers, metal pressing machines, gantry shears and so on. Our products have been sold all over the country and have received wide acclaim. We look forward to cooperating with you and welcome everyone to visit our factory.

Hot Tags: metal baler, China, suppliers, manufacturers, factory, buy, cheap, discount, quotation, price list, in stock

Feedback

You Might Also Like